Concrete Workability Tests

3.1 Workability Test Methods for Concrete
3.1.1 Confined Flow Test Methods
” -3.1.1.1 Compaction Factor Test (Compacting Factor Test, Glanville Compaction Test)
” -3.1.1.2 Free Orifice Test (Orimet Test)
” -3.1.1.3 K-Slump Tester
3.1.2 Free Flow Test Methods
” -3.1.2.1 Slump Test
” -3.1.2.2 Modified Slump Test
” -3.1.2.3 SLump Rate Machine (SLRM)
” -3.1.2.4 Kelly Ball Test
” -3.1.2.5 Ring Penetration Test
” -3.1.2.6 Cone Penetration Test
” -3.1.2.7 Moving Sphere Viscometer
” -3.1.2.8 Flow Trough Test
” -3.1.2.9 Delivery-Chute Torque Meter
” -3.1.2.10 Delivery-Chute Depth Meter
” -3.1.2.11 Surface Settlement Test
3.1.3 Vibration Test Methods
” -3.1.3.1 Compaction Test (Walz Test, Compaction Index Test, Degree of Compaction Test)
” -3.1.3.2 Vebe Consistometer
” -3.1.3.3 Powers Remolding Test
” -3.1.3.4 Thaulow Tester
” -3.1.3.5 Flow Table Test (DIN Flow Table)
” -3.1.3.6 Angles Flow Box Test
********3.1.3.7 LCL Flow Test
” -3.1.3.8 Wigmore Consistometer
” -3.1.3.9 Vibropenetrator
” -3.1.3.10 Inverted Slump Cone Test
” -3.1.3.11 Vertical Pipe Apparatus
” -3.1.3.12 Vibrating Slope Apparatus (VSA)
” -3.1.3.13 Settlement Column Segregation Test
” -3.1.3.14 Vibratory Flow Meter
3.1.4 Rotational Rheometers
” -3.1.4.1 Powers and Wiler Plastometer
” -3.1.4.2 Tattersall Two-Point Workability Device
” -3.1.4.3 BML Viscometer
” -3.1.4.4 IBB Rheometer
” -3.1.4.5 BTRHEOM Rheometer
” -3.1.4.6 Bertta Apparatus
” -3.1.4.7 FHPCM
” -3.1.4.8 CEMAGREF-IMG
” -3.1.4.9 Soil Direct Shear Test
” -3.1.4.10 Measure Workability of Concrete in Mixer
” -3.1.4.11 Fresh Concrete Tester (FCT 101)
3.1.5 Test Methods for Very Low Slump Concrete
” -3.1.5.1 Proctor Test
” -3.1.5.2 Kango Hammer Test
” -3.1.5.3 Intensive Compaction Test
3.1.6 Other Test Methods
” -3.1.6.1 Trowel Test
” -3.1.6.2 Multiple Single-Point Tests
” -3.1.6.3 Soil Triaxial Test
” -3.1.6.4 System and Method for Controlling Concrete Production
3.2 Workability Test Methods for Self-Compacting Concrete
” -3.2.1 V-Funnel Test
” -3.2.2 Slump Flow Test
” -3.2.3 J-Ring Test
” -3.2.4 L-Box Test
” -3.2.5 U-Box Test
” -3.2.6 Fill Box Test (Simulated Filling Test, Filling Capacity Box, Kajima Test)
” -3.2.7 Wet Sieving Stability Test (GTM Screen Stability Test)
” -3.2.8 Penetration Test for Segregation
3.3 Workability Test Methods for Pastes and Grouts
” -3.3.1 Flow Cone Test
” -3.3.2 Turning Tube Viscometer
” -3.3.3 Wuerpel Device
” -3.3.4 Mini-Slump Test
” -3.3.5 Mini-Flow Test
” -3.3.6 Vicat Needle Test
” -3.3.7 ViscoCorder

Scroll to Top