Behavior and Design of Anchor Bolts Loaded in Shear

Anchor bolts loaded in shear, and located without a nearby free edge in the direction of load, can fail by local crushing of the masonry under bearing stresses from the anchor bolt; by pryout of the head of the anchor in a direction opposite to the direction of applied load, or by yield and fracture of the anchor bolt steel. Anchor bolts loaded in shear, and located near a free edge in the direction of load, can also fail by breakout of a roughly semi-conical volume of masonry in the direction of the applied shear. Pryout and shear breakout are shown in parts (a) and (b), respectively, of Fig. 5.30.

Scroll to Top